With pinball making a substantial resurgence across the nation, Gentle Giant wishes to ensure that these timeless, beautiful devices remain damage-free while being carried. Oh, and we want individuals moving them to be safe, too.
In the beginning glance, pinball devices can appear frightening to move due to the fact that of their weight, size, and fragility. Luckily, our skilled Giants have a few tricks up their sleeves to guarantee your pinball is moved with ease.
Folding Down the Headbox
Most of modern pinballs (made in the last Twenty Years approximately) have a hinge system which permits the headbox to be folded down. Early pinball machines had their headboxes bolted on, using either 2 or 4 bolts. All Electro-Mechanical pinballs use this system, together with the early Strong State makers.
Later machines have hinges and utilize a locking system to keep the headbox upright. There might also be two bolts inside as included security, in case the lock is broken or accidentally un-latched.
For Electro-Mechanical pinball devices, you have to eliminate the headbox rear gain access to panel to access to the bolts and plugs inside. Typically this panel has a lock on it to keep it in location, however over time the key may have been lost. Rather typically, there is a screw keeping this panel in place.
Once inside, eliminate the bolts and disconnect the big connectors that have wiring going down into the maker. You might want to label these ports to put them back in the best area, however they should be different sizes, making it challenging to plug back improperly.
You can now get rid of the headbox entirely, or fold the headbox down onto the playfield glass. Make sure you use some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will assist keep the back glass in location.
Early Strong State Pinballs
For early Solid State Pinballs, you will have to eliminate the back glass. There is a lock located on the headbox in one of 3 areas: the left-hand side at the top, right-hand side at the leading or on top of the headbox in the.
As soon as unlocked, remove the back glass by lifting it up using the lift channel (at the bottom of the glass), then pull it out from the bottom.
Open up the back box lamp panel by lifting the lock situated on either the left-hand side or right-hand side. The panel can now swing out to you, and give you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs require you to raise the light panel in order to swing it open.
Now that you are within, you can remove the bolts, and any plugs that have wires going down into the machine. You might desire to identify these plugs to put them back in the right spot. You may not need to eliminate the plugs, as the electrical wiring needs to be long enough to permit the headbox to be folded down.
At this moment, you can lock up the lamp panel and replace the back glass.
Modern Solid State Pinballs
For Data East, Sega, and Stern Modern pinballs, there is a turnable latch system located at the back of the headbox. Utilizing the provided secret, turn the lock 90 ° counter-clockwise.
For Williams, Bally, and Gottlieb, you can quickly unlatch the back box at the back of the maker. This is a simple setup and requires no tools.
If you can now fold down the head box onto the cabinet, you're done. Ensure you utilize some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will likewise assist keep the back glass in location.
You browse this site need to get inside if you can not fold the head box down. There is a lock located at the top of the back glass in the. Use the supplied key to unlock, and eliminate the back glass by lifting it up from the bottom, and after that pulling it out from the bottom.
Next, you will need to remove the display panel. (Some newer Williams and Bally pinballs do not have a separate amp panel, it is part of the back glass panel. And later Sega and Stern pinballs use a fluorescent tube for the back glass lighting).
Remove the two bolts, put the back box back together, and fold down the head box onto the cabinet. Make sure you use some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in place.
Removing the Legs.
Pinball Machine legs are held in place by eight bolts. They will be either 5/8 inch or 9/16 inch heads. The modern pinballs have captive nuts or threaded plates inside for the bolts to screw into. These bolts can be removed, and the legs will come off.
These threaded plates and captive nuts can be harmed, and the usage of additional nuts might have been needed. If this holds true, you will have to open the front door of the pinball, slide out the playfield glass, and lift up the playfield.
With the front door (coin door) open, move the lock down bar latch across and remove the lock down bar. Then slide out the playfield glass, and put in a safe place. Next, raise the playfield by positioning your hand where the ball drains pipes, and raise the playfield up.
You must now have access to any nuts that might have been utilized. When any nuts have been eliminated, replace the playfield glass and lock down bar, and lock the front door.
Be sure to mark or remember which legs are for the front and back, as they will be adjusted differently to match.
Filling the Pinball.
You are now all set to carry your pinball device. Prior to you pack it, ensure you remove the pinballs so they don't bounce around during transport.
It may be easier to remove the legs just prior to filling the maker if you are moving the pinball utilizing a van or SUV. Get a pal to help and have one of you supporting the pinball, while the other removes the front legs. Move the maker in, then eliminate the back legs. It is much easier to fill the device front.
Make certain you strap the pinball in, as you do not desire it moving if you have to stop suddenly!
For Electro-Mechanical pinball machines, you require to get rid of the headbox rear gain access to panel to acquire access to the bolts and plugs inside. (Some newer Williams and Bally pinballs do not have a separate amp panel, it is part of the back glass panel. And later on Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).
If you are moving the pinball using a van or SUV, it might be much easier to eliminate the legs just prior to loading the machine. Get a pal to have and help one of you supporting the pinball, a fantastic read while the other removes the front legs.